HunterProLight-4 HUB

Functionality of the flashlight:

• Flashlight brightness adjustment (5 or 8 levels of brightness);
• Programming and selection of different glow temperature versions (15 glow scenarios);
• Selection of glow brightness at intermediate levels when the light is turned on from lower to higher or from higher to lower light levels;
• Distribution of glow power of the flashlight between Center and Halo (2 control options);
• Choosing preset MoonLight modes (4 scenarios, turning off with timer or turning off completely);
• Choosing glow power of the MoonLight (4 levels);
• Timer used for smooth lighting (5, 10, 15, 20, 25 sec.);
• Alert with commands Us-Them, Amber-beacon, Strobo – notification about battery discharge status (holding or pressing the button);
• Warning about half-discharged battery (single announcement);
• Warning about low battery (double announcement);
• Warning about battery discharge (3, 6, 9 times, continuously or off) only after the first shutdown of the flashlight;
• Monitor the battery charge status;
• Automatically switch to emergency-waiting glow (corresponds to previously used MoonLight) when the battery is deeply discharged;
• Automatically turned off when the battery is deeply discharged;
• Automatic block of flashlight in (5, 10, 15, 30 minutes, 1, 2, 4, 8 hours) when the flashlight is turned off – the Don’t forgetter;
• Switching the flashlight off automatically in (1, 2, 3, 5,10, 15, 30 minutes, 1, 2, 4, 8 hours) when the flashlight is in the MoonLight mode;
• Automatically turned off when the battery is critically discharged (sharp flash alert when the button is pressed);
• Turns off when the flashlight is on after time of non-use is set (5, 10, 15, 30 minutes, 1, 2, 4, 8 hours);
• Heat removal temperature control in order to ensure a safe temperature mode of the LEDs (two levels of thermal protection);
• Flashlight is locked if critically overheated (thermal blocking function);
• Adjustable speed of brightness level selection (from 0.3-seconds, with 0.1 seconds interval);
• Save and restore an individual user profile;
• Reset the flashlight to factory settings;
• Flashlight is automatically locked when the batteries are first installed in the case (prevents accidental switching on);
• Flashlight software reload if necessary, user settings saved;
• Flashlight switch is locked from accidental activation.

All functions can be programmed or disabled for each user individually. The manufacturer reserves the right to make changes to the design, driver specifications and their software at any time without prior notice, as well as to the construction of the flashlights.